Product Index | View as List
CLPB
Plug-and-cage choke that moves a stem-mounted plug axially through a ported cage to open flow area. Cage ports direct flow streams toward the center to neutralize forces, cut erosion and turbulence, and lower stem load. A pressure-balanced, self-flushing design with equal-percentage control gives high Cv and lower operating torque.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 2K to 15K API, ASME/ANSI to 1500#
- Sizes 1-13/16″ to 4-1/16″
- Trim sizes .75 to 2.2
- Equal-percentage flow characteristic
- Pressure-balanced, self-flushing design
- Tungsten carbide trim for erosive service
- API/ANSI flanged, butt-weld, or hammer union ends
- Manual or actuated
Application
- High-Cv production and injection control
- Larger pressure-drop service
- Erosive and sand-laden flow
- Wells needing wide rangeability
- Automated choke control
- Lower-torque actuated installations
CLPBB
Bolted bonnet plug-and-cage choke that runs a stem-mounted plug through a ported cage to open flow area. The bolted bonnet supports a larger trim range while the pressure-balanced path cuts erosion, turbulence, and stem load. Equal-percentage control delivers high Cv and lower operating torque in high-demand service.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 2K to 15K API, ASME/ANSI to 1500#
- Bolted bonnet design
- Sizes 1-13/16″ to 4-1/16″
- Trim sizes .75 to 3.2
- Equal-percentage flow characteristic
- Pressure-balanced, self-flushing design
- Tungsten carbide trim for erosive service
- API/ANSI flanged, butt-weld, or hammer union ends
Application
- High-Cv production and injection control
- Larger-trim and high-turndown duty
- Erosive and sand-laden flow
- Larger pressure-drop service
- Automated choke control
- Lower-torque actuated installations
- External Sleeve
CC10
External sleeve choke that pairs a ported cage and external sleeve in an angled body, in a 1" configuration. A higher liquid pressure recovery factor across a wider range of openings lowers cavitation and vibration risk while holding accurate control. The cage and sleeve are machined from solid tungsten carbide or stainless steel.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 1″ configuration
- 5,000 to 15,000 PSI
- Trim sizes 0.75″ through 3.2″
- Solid tungsten carbide or stainless steel cage and sleeve
- Higher liquid pressure recovery factor (F_L)
- Angled ported-cage body
- Threaded, flanged, butt-weld, or socket-weld connections
- Manual or actuated
Application
- High-pressure flow control
- Cavitation and vibration-prone service
- Erosive and high-velocity flow
- Production and injection lines
- Automated choke control
- Accurate control across wide openings
CC20
External sleeve choke that pairs a ported cage and external sleeve in an angled body, in a 2" configuration. A higher liquid pressure recovery factor across a wider range of openings lowers cavitation and vibration risk while holding accurate control. The cage and sleeve are machined from solid tungsten carbide or stainless steel.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 2″ configuration
- 5,000 to 15,000 PSI
- Trim sizes 0.75″ through 3.2″
- Solid tungsten carbide or stainless steel cage and sleeve
- Higher liquid pressure recovery factor (F_L)
- Angled ported-cage body
- Threaded, flanged, butt-weld, or socket-weld connections
- Manual or actuated
Application
- High-pressure flow control
- Cavitation and vibration-prone service
- Erosive and high-velocity flow
- Larger-bore production and injection lines
- Automated choke control
- Accurate control across wide openings
- Inline Disc
CMC
Quarter-turn inline choke that uses MOV disc-type trim for accurate straight-through control. Diamond-lapped discs flat within two light bands seat for reliable shut-off, while differential pressure holds them together to steady flow and cut vibration. An open flow path passes large solids and a wiping action keeps the disc faces clean.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 5,000 PSI rating
- Quarter-turn MOV disc trim
- Solid tungsten carbide, ceramic, or stainless steel discs
- Pie, circular, or half-moon flow areas
- Diamond-lapped disc flatness (±0.00002″)
- Replaceable outlet wear sleeve
- Threaded, flanged, butt-weld, or socket-weld connections
- Manual or actuated
Application
- Straight-through inline flow control
- Large-solids and abrasive service
- Accurate disc-style throttling
- Production and flowback operations
- Automated choke control
- Inline fit-up and retrofits
CMI20
Three-quarter-turn inline choke that uses MOV disc-type trim for accurate straight-through control. Diamond-lapped discs flat within two light bands seat for reliable shut-off, while differential pressure holds them together to steady flow and cut vibration. Its wider service range covers standard, NACE, high-temp, and low-temp duty across multiple body materials.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 5,000 PSI rating, 1″ and 2″ sizes
- Three-quarter-turn MOV disc trim
- Standard, NACE, steam/high-temp, and low-temp service
- Carbon, alloy, or stainless steel body
- Solid tungsten carbide, ceramic, or stainless steel discs
- Pie, circular, or half-moon flow areas
- Replaceable outlet wear sleeve
- Threaded, flanged, butt-weld, or socket-weld connections
Application
- Straight-through inline flow control
- Large-solids and abrasive service
- Sour (NACE) and high/low-temperature service
- Finer disc-style throttling resolution
- Production and flowback operations
- Automated choke control
CMA
Quarter-turn angled choke that uses MOV disc-type trim for accurate flow control in an angled body. Diamond-lapped discs flat within two light bands seat for reliable shut-off, while differential pressure holds them together to steady flow and cut vibration. An open flow path passes large solids and a wiping action keeps the disc faces clean.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- 285 to 5,000 PSI rating coverage
- Quarter-turn MOV disc trim
- Angled body design
- Solid tungsten carbide, ceramic, or stainless steel discs
- Disc sizes 1/4″, 3/8″, 1/2″, 5/8″, and 3/4″
- Pie, circular, or half-moon flow areas
- Diamond-lapped disc flatness (±0.00002″)
- Threaded, flanged, butt-weld, or socket-weld connections
Application
- Angled-body flow control
- Large-solids and abrasive service
- Accurate disc-style throttling
- Production and flowback operations
- Automated choke control
- Wellhead and manifold installs
Regional Oil & Gas Valve Support
Elkhorn Valve & Equipment provides exclusive regional representation across the Mountain West and Northern Plains. Supporting upstream and midstream operations with proven valve, closure, and flow control product lines.
We understand the basins and we support distributors and OEM partners with decisive, territory-driven service.
- Colorado
- Montana
- New Mexico
- North Dakota
- South Dakota
- Utah
- Wyoming
Connect with our regional sales team for fast quoting, project support, and direct access to factory resources.
Primary basins served: Bakken, Williston, DJ, Powder River, Green River and Uinta.