Production Products
Choke / Control Valves
ANGLE PATTERN CHOKE / CONTROL VALVE
FLOW CONTROL / HIGH PRESSURE
High-performance choke and control valve designed for erosion-resistant flow control in wellhead and production systems. Built for durability and flexibility, it supports both manual and automated operation. Ideal for applications requiring reliable performance in severe service conditions.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Two- and three-inch sizes; ANSI 600-2500 connections
- BTE/BAP trim assemblies are interchangeable; top-entry design for quick manual-to-automated conversion
- Corrosion-resistant body materials: high-strength cast steel and 316 stainless steel
- Tungsten carbide or ceramic discs for extreme erosive service
- Staged pressure drops to inhibit freeze-up in natural gas service
- Replaceable body sleeve; multiple orifice sizes; optional tungsten carbide wear sleeves; optional sour gas sealing components
Application
- Gas and liquid wellhead flow control from basic manual to fully automated systems
- High-erosion production choke service requiring staged pressure drops
- Natural gas service where freeze-up prevention is required
- Actuated choke installations requiring low operating torque
INLINE CHOKE VALVE
COMPACT DESIGN / HIGH-PRESSURE FLOW CONTROL
Compact inline choke valve designed for controlling gas and liquid flow in high-pressure production systems. Built to handle erosive conditions, it delivers consistent flow regulation and long service life. Ideal for applications where space, reliability, and performance are critical.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- One- and two-inch sizes; threaded or ANSI 600-1500 flanged connections
- Stellite (cobalt-chromium alloy) wear sleeve absorbs cavitation and pitting; directs flow back to pipe centerline
- A487 carbon steel, nickel aluminum bronze, or 316 SS body materials
- Tungsten carbide or ceramic discs for erosive service
Application
- Gas and liquid production flowline rate control
- Waterflood and CO2 injection rate management
- Surface production choke applications requiring erosion-resistant internals
ECONOMICAL ANGLE PATTERN CHOKE
COST-EFFECTIVE / STANDARD PRODUCTION SERVICE
Cost-effective angle pattern choke designed for dependable flow control in standard production applications. Built for durability and ease of use, it provides reliable performance without added complexity. Ideal for operations requiring a balance of performance and value.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Two-inch size; NPT connection; A487 4D alloy steel body for enhanced body strength
- Self-impinging flow path diverts erosive energy away from the valve body
- Pressure relief port ensures depressurized valve before disassembly for operator safety
- Standard ceramic discs for general service; tungsten carbide discs for erosive service
- Bonnets designed to accept actuator brackets; optional actuation kits available
- Optional tungsten carbide-lined port; gas blowdown line; automated line heater choke
Application
- Gas blowdown and line heater choke service
- Automated choke control requiring actuator-ready bonnet design
- General production flow control where economical construction and easy maintenance are priorities
Gate Valves
THROUGH-CONDUIT GATE VALVE
FULL-BORE FLOW / LOW PRESSURE DROP
Through-conduit gate valve designed for unrestricted flow and reliable shutoff in oil and gas production systems. Built for durability in corrosive and erosive environments, it ensures consistent sealing performance. Ideal for applications requiring full-bore flow and minimal pressure loss.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Through-conduit, unrestricted bore; full-floating “T” nut seals positive at pressures as low as 50 psi
- One- to six-inch sizes; threaded or ANSI 600-1500 flanged connections
- ASTM A487 steel or nickel aluminum bronze body/bonnet
- Fully field-serviceable inline without body removal from the line
- Gas testing available; NACE MR0175 compliance available on request
Application
- Waterflood and CO2 gas injection operations
- Enhanced oil recovery production flow lines
- Standard water, oil, and gas production line service
- Wellhead and flow line applications in corrosive/erosive environments
DIAPHRAGM-ACTUATED GATE VALVE
AUTOMATIC SHUTOFF / FAIL-SAFE OPERATION
Diaphragm-actuated gate valve designed for automatic shutoff in critical wellhead and flowline applications. Built for reliability and simplified operation, it provides consistent fail-open or fail-closed performance. Ideal for systems requiring dependable safety and control.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- All-in-one safety valve design minimizes safety system cost and complexity
- Bi-directional, reduced-port design; positive fail-open or fail-close operation
- Pneumatically actuated with optional mechanical override
- Threaded or flanged connections; API 5000 or ANSI 1500 pressure rating
- Durable seal construction for long service; simplified maintenance design
Application
- Wellhead wing valve and shutdown service
- Casing relief and blowdown systems
- Gas lift and dump valve applications
- Surface safety systems requiring automatic fail-safe operation
EOR Products
INJECTION TEE
CHEMICAL INJECTION / WELLHEAD SYSTEMS
Injection tee designed to introduce water or chemical injection into production systems with minimal disruption. Built for durability and compatibility, it integrates seamlessly into high-pressure environments. Ideal for injection systems requiring reliable and consistent flow entry.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Designed for water and CO2 injection; works seamlessly with FET Gravity Ball Checks and In-Line Check Valves
- Multiple sizes available; FNPT x EUE pin connections
- Nickel aluminum bronze or 316 SS construction
- ANSI 600-1500 pressure rating
Application
- Water injection wellhead assemblies
- CO2 injection surface installations
- Waterflood injection trees requiring integrated check valve and swab valve access
Y STRAINER
DEBRIS FILTRATION / SYSTEM PROTECTION
Y strainer designed to remove debris and protect injection systems from contamination. Built for durability and easy maintenance, it helps maintain system performance and reduce downtime. Ideal for applications requiring clean, uninterrupted flow.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Blow-down port allows debris removal without shutting down the line
- One- and two-inch sizes; FNPT or ANSI 900/1500 flanged connections
- Nickel aluminum bronze or 316 SS body materials
- 316 SS filter screens; installed upstream of flow meters
Application
- Upstream of turbine flow meters in waterflood injection lines
- CO2 injection fluid filtration
- Injection assembly debris protection
GRAVITY BALL CHECK
SIMPLE DESIGN / RELIABLE BACKFLOW PREVENTIONGravity ball check valve designed to prevent backflow in injection systems and protect upstream equipment. Built for reliable, maintenance-friendly operation, it performs consistently in demanding environments. Ideal for applications requiring dependable backflow protection.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Stops backflow from tubing when tubing pressure exceeds injection line pressure
- O-ring sealed cap threads protected from line flow and corrosion
- One- and two-inch sizes; threaded, union, or socket weld connections
- ANSI 1500 pressure rating; nickel aluminum bronze or 316 SS construction
Application
- Waterflood injection tubing backflow prevention
- Inline with FET Injection Tees in surface injection assemblies
- CO2 injection backflow protection
O-RING UNION
LEAK-RESISTANT SEAL / INJECTION SYSTEM SERVICE
O-ring union designed for secure, leak-resistant connections in injection systems. Built for easy installation and maintenance, it allows quick disassembly without disturbing surrounding components. Ideal for applications requiring reliable sealing and serviceability.
GO TO PRODUCT PAGE >
Download Product Data Sheet >
Highlights
- Any assembly component removable or replaceable without full installation teardown
- Multiple sizes; FNPT or socket weld connections
- ANSI 1500 pressure rating; 316 SS construction
Application
- Waterflood and CO2 injection assembly plumbing connections
- Injection tree installations requiring routine component access and maintenance